 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SO SMD 14 Pin 5 Tap TTL Compatible Active Delay Lines TAP DELAYS 5% or 2 nS 5, 10, 15, 20 6, 12, 18, 24 7, 14, 21, 28 8, 16, 24, 32 9, 18, 27, 36 10, 20, 30, 40 12, 24, 36, 48 15, 30, 45, 60 TOTAL DELAYS 5% or 2 nS 25 30 35 40 45 50 60 75 PART NUMBER EPA424-25 EPA424-30 EPA424-35 EPA424-40 EPA424-45 EPA424-50 EPA424-60 EPA424-75 TAP DELAYS 5% or 2 nS 20, 40, 60, 80 25, 50, 75, 100 30, 60, 90, 120 35, 70, 105, 140 40, 80, 120, 160 45, 90, 135, 180 50, 100, 150, 200 TOTAL DELAYS 5% or 2 nS 100 125 150 175 200 225 250 PART NUMBER EPA424-100 EPA424-125 EPA424-150 EPA424-175 EPA424-200 EPA424-225 EPA424-250 Whichever is greater. Delay times referenced from input to leading edges at 25C, 5.0V, with no load. DC Electrical Characteristics Parameter Test Conditions VOH VOL VIK IIH High-Level Output Voltage Low-Level Output Voltage Input Clamp Voltage High-Level Input Current Schematic Min Max Unit 0.5 -1.2 50 1.0 -2 -100 V V V A mA mA mA 14 VCC 12 4 10 6 8 OUTPUT VCC = min. VIL = max. I OH = max 2.7 VCC = min. VIH = min. I OL= max VCC = min. II = II K VCC = max. VIN = 2.7V VCC = max. VIN = 5.25V IIL Low-Level Input Current VCC = max. VIN = 0.5V IOS Short Circuit Output Current VCC = max. VOUT = 0. -40 (One output at a time) ICCH High-Level Supply Current VCC = max. VIN = OPEN ICCL Low-Level Supply Current VCC = max. VIN = 0 TRO Output Rise Time Td 500 nS (0.75 to 2.4 Volts) NH Fanout High-Level Output VCC = max. VOH = 2.7V NL Fanout Low-Level Output VCC = max. VOL = 0.5V INPUT 1 7 GROUND 75 mA 75 mA 4 nS 20 TTL LOAD 10 TTL LOAD Recommended Operating Conditions VCC VIH VIL IIK IOH IOL PW* d* TA Supply Voltage High-Level Input Voltage Low-Level Input Voltage Input Clamp Current High-Level Output Current Low-Level Output Current Pulse Width of Total Delay Duty Cycle Operating Free-Air Temperature Package Dimensions Min 4.75 2.0 Max 5.25 0.8 -18 -1.0 20 Unit V V V mA mA mA % % C .100 .200 Max. .060 .150 .50 .500 Max. .235 Max. .004 Typ. .24 40 -55 40 +125 PCA EPA424-25 D.C. .155 .275 *These two values are inter-dependent. Suggested Solder Pad Layout Input Pulse Test Conditions @ 25 C EIN PW TRI PRR VCC Pulse Input Voltage Pulse Width % of Total Delay Pulse Rise Time (0.75 - 2.4 Volts) Pulse Repetition Rate @ Td 200 nS Pulse Repetition Rate @ Td > 200 nS Supply Voltage 3.2 110 2.0 1.0 100 5.0 Unit .02 .050 Volts % nS MHz KHz Volts .228 .244 DSA424 Rev. A 2/5/96 QAF-CSO1 Rev. B 8/25/94 Unless Otherwise Noted Dimensions in Inches Tolerances: Fractional = 1/32 .XX = .030 .XXX = .010 ELECTRONICS INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 TEL: (818) 892-0761 FAX: (818) 894-5791 |
Price & Availability of EPA424-45
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |